1- Check the coolant level- 2- Check for any engine coolant leakage (from gaskets, hoses, O-rings, etc.)- 3- Check for dirt, leaves, or insects on the radiator and the A/C condenser- 4- Check for deteriorated coolant- 5- Check for a damaged or deformed fan shrouds- 6- Check the fan motors are operating properly (air should be blowing toward the engine)- 7- Inspect the fan motors or fan relays- 8- Check the radiator cap- 9- Check the thermostat- 10- Inspect the water pump- 11- Check for clogged radiator- 12- Check for plugged or deteriorated radiator hoses- 13- Check for a plugged heater core or hoses- 14- Check for a damaged cylinder head gasket- Also check for
Check the radiator and A/C condenser fans are operating properly
Water Passage Removal and Installation NOTE: Where icon is shown, click for further information- 1 Detailed information, notes, and precautions Torque: N·m (kgf·m, lbf·ft)... Engine Configuration ...97
Engine Configuration Ignition Timing Inspection ...199
Ignition Timing Inspection 1.HDS - Connect 2.DTC - Check NOTE: If a DTC is present, diagnose and repair the cause before continuing with this inspection- 3.Engine - Warm Up 1- Start the...