Rear Stabilizer Link Removal and Installation

Rear Stabilizer Link Removal and Installation

NOTE: How to read the torque specifications- 1.Vehicle - Lift

2.Rear Wheel - Remove

3.Stabilizer Link - Remove

1- Remove the flange nut (A) while holding the respective joint pin (B) with a hex wrench (C)- NOTE: Use a new flange nut during reassembly- 2- Remove the stabilizer link lower mounting bolt (D)- NOTE: Use a new bolt during reassembly- 4.All Removed Parts - Install

1- Install all removed parts in the reverse order of removal.

See also:
Adaptive Damper System Description - System Diagram
Adaptive Damper System Description - System Diagram The adaptive damper system controller uses information from the PCM, the VSA modulator-control unit, the EPS control unit, and the SRS...
Rear Damper Removal, Installation, and Inspection
Rear Damper Removal, Installation, and Inspection NOTE: How to read the torque specifications- 1.Rear Damper - Exploded View Exploded View NOTE: How to read the torque...
Adaptive Damper Control Unit Connector for Inputs and Outputs
Adaptive Damper Control Unit Connector for Inputs and Outputs Adaptive Damper Control Unit Inputs and Outputs for 24P Connector (female terminals) Terminal Number Terminal sign...