Seat Belt Inspection Accord
Regularly check the condition of your seat belts as follows:
- Pull each belt out fully and look for frays, cuts, burns, and wear.
- Check that the latch plates and buckles work smoothly and the belts retract easily. If a belt does not retract easily, cleaning the belt may correct the problem. Only use mild soap and warm water. Do not use bleach or cleaning solvents. Make sure the belt is completely dry before allowing it to retract.
Any belt that is not in good condition or working properly will not provide proper protection and should be replaced as soon as possible.
A belt that has been worn during a crash may not provide the same level of protection in a subsequent crash. Have your seat belts inspected by a dealer after any collision.
Not checking or maintaining seat belts can result in serious injury or death if the seat belts do not work properly when needed.
Check your seat belts regularly and have any problem corrected as soon as possible.
Regularly check the condition of your seat belts as follows: Pull each belt out fully and look for frays, cuts, burns, and wear. Check that the latch plates and buckles work smoothly and the... Adjusting the Shoulder Anchor Accord
The front seats have adjustable shoulder anchors to accommodate taller and shorter occupants. Move the anchor up and down whileholding the release button. Position the anchor so that the belt... Lap/Shoulder Seat Belts Accord
All five seating positions are equipped with lap/shoulder seat belts with emergency locking retractors. In normal driving, the retractor lets you move freely while keeping some tension on the...