Cam Chain Inspection Civic

Cam Chain Inspection

1.Right Front Wheel - Remove

2.Engine Undercover - Remove

NOTE: Remove the necessary part(s)- 3.Chain Case Cover - Remove

4.Cam Chain - Inspect

1- Measure the length of the cam chain auto-tensioner rod- Cam Chain Auto-Tensioner Rod Length

Service Limit:

26.3 mm (1.035 in)

2- If the length is over the service limit, replace the cam chain. When replacing, check the teeth on VTC actuator A and VTC actuator B for wear and damage. If any of them are worn or damaged, replace if necessary- 3- Check the oil passage on the cam chain auto-tensioner for clogs. If the cam chain auto-tensioner is clogged, replace it- 5.All Removed Parts - Install

1- Install the parts in the reverse order of removal.

See also:
Engine low power Civic
Engine low power Diagnostic procedure 1- Check for PGM-FI DTCs- 2- Inspect the charge air cooler for foreign materials or clogged- 3- Inspect the intake air system for clogged. Air cleaner... Drive Belt Auto-Tensioner Removal and Installation Civic
Drive Belt Auto-Tensioner Removal and Installation NOTE: Where icon is shown, click for further information- Do the drive belt auto-tensioner air bleeding after install the drive belt... EVAP Canister Purge Valve Removal and Installation Civic...380
EVAP Canister Purge Valve Removal and Installation Flammable - Keep Fire Away NOTE: Refer to the Fuel and Emissions Systems Service Precautions before disconnecting the fuel line- 1...