Ignition Coil and Spark Plug Removal and Installation CR-V...4777
Ignition Coil and Spark Plug Removal and Installation
1.Ignition Coil - Remove
1- Disconnect the connectors (A)- 2- Remove the ignition coils (B)- 2.Spark Plug - Remove
3.All Removed Parts - Install
1- Install the parts in the reverse order of removal- NOTE: When the spark plugs installing, apply a small amount of anti-seize compound to the spark plug threads, and screw the spark plugs into the cylinder head, finger-tight, then tighten the spark plugs to the specified torque- 4.Maintenance Minder - Reset (With Maintenance Minder System)
1- If the Maintenance Minder required to replace the spark plugs, reset the Maintenance Minder with the gauge (see "Resetting the Maintenance Minder").
Service Manual Under-Floor TWC Removal and Installation Special Tools Required ImageDescription/Tool NumberO2 Sensor Socket Wrench Snap-on SWR2 or O2 Sensor Wrench Snap-on YA8875, commercially... EVAP Canister Vent Shut Valve Removal and Installation CR-V
EVAP Canister Vent Shut Valve Removal and Installation 1.Front Floor Undercover - Remove 2.EVAP Canister Vent Shut Valve - Remove 1- Disconnect the connector (A)- 2- Remove the EVAP... Communication Systems (F-CAN) Description CR-V
Communication Systems (F-CAN) Description F-CAN (High-speed CAN) (without CAN gateway) The network between the powertrain and control units for chassis system is called F-CAN and it employs high...